ELEMENT EM FIT Non SELV
Product family features
- Line frequency: 50 Hz | 60 Hz
- Supply voltage: 220…240 V
- Lifetime: up to 50,000 h (temperature at Tc max. = -10 °C, max 10% failure rate)
- Wide output voltage range
- Fixed output (no dimming)
Product family benefits
- Small housing design
- Flexible current setting (DIPswitch – 4 currents)
- High efficiency and reliability
- Enhanced safety due to overload, overtemperature, short-circuit protection
- High light quality due to low ripple current
- Long lasting and high reliability
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
EM FIT 18/220…240/350 D CS L
|
27...54 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
EM FIT 40/220...240/350 D CS L
|
40…120 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
EM FIT 60/220…240/350 D CS L
|
90…175 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
EM FIT 75/220...240/550 D CS L
|
90…216 V | 350 / 400 / 500 / 550 mA | 210.0 mm | 30.0 mm | 21.0 mm |
Information about Family
Areas of application
- Linear and area lighting
- Shop lighting
- Offices, Public buildings, Supermarkets
- Industry lighting
- Suitable for luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
