OPTOTRONIC FIT LT2 LP
Product family features
- Supply voltage: 220…240 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Line voltage: 198…264 V
- According to EN 61347-1, 61347-2-13, 62384
- RI suppression: to EN 55015
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- Independent connection via through-looping (depending on version of product)
Product family benefits
- Versatile scope of application due to output power range of up to 40 W
- Fulfill safety requirement due to overload, overtemperature protection
- High efficiency
- Higher quality of light thanks to < 5% output ripple current
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 15/220…240/500 LT2 LP
|
15…50 V | 150…500 mA | 103.0 mm | 67.0 mm | 22.5 mm | ||
|
OT FIT 25/220…240/700 LT2 LP
|
15…50 V | 300…700 mA | 103.0 mm | 67.0 mm | 22.5 mm | ||
|
OT FIT 40/220…240/1A0 LT2 LP
|
15…50 V | 500…1050 mA | 103.0 mm | 67.0 mm | 22.5 mm |
Information about Family
Compact and extra flat.
This extra flat LED driver offers flexibility at choosing compatible LED modules due to the very wide operating window. Some other highlights include the capability for DC-input, the suitability for emergency installations and the optional cable clamp that allows independent installations and trough-looping.
This extra flat LED driver offers flexibility at choosing compatible LED modules due to the very wide operating window. Some other highlights include the capability for DC-input, the suitability for emergency installations and the optional cable clamp that allows independent installations and trough-looping.
Areas of application
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Luminaires with flexible current setting (LEDset2)
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
- Suitable for downlights, spotlights and LED panels
- Independent mounting via Cable Clamp Kit possible
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.