Digital Systems
 

OPTOTRONIC FIT NFC L (SELV)

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 75 W
  • Constant Lumen Output (CLO)
  • Supply voltage: 220…240 V
  • Available with output current range: up to 1,400 mA
  • SELV driver
Product family benefits
  • Flexible and future-proof current setting via NFC (Near Field Communication)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • Fulfilling SVM (≤ 0.4) and PsT (≤ 1.0) standards
  • Higher quality of light thanks to < 1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature protection

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 25/220...240/500 NFC L
20…51 V 170…500 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 35/220...240/700 NFC L
20…51 V 250…700 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 55/220...240/1A0 NFC L
20…51 V 400…1050 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 75/220...240/1A4 NFC L
20…51 V 600…1400 mA 280.0 mm 30.0 mm 21.0 mm

Information about Family

Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads