TEC FLEX Shortpitch IP00

Product family features
  • Flexible and cuttable LED strip
  • Luminous flux: up to 2,000 lm/m
  • Available with color temperature: 2,700K, 3,000 K, 4,000 K
  • Up to 50,000 hrs lifetime @ tc max
  • Recommended in system use with OPTOTRONIC
  • Color consistency in 3 SDCM
Product family benefits
  • High homogeneity thanks to small LED pitch
  • Pre-wired LED strip, simple and quick plug-and-play installation
  • Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
  • Type of protection: IP66
  • Dimmable (with suitable PWM dimming methods)
Equipment / Accessories
  • Simplified connection with optional matching CONNECTsystem
  • Flexessories: a complete set of aluminum channels with diffusers and lenses
  • Drivers and dimmers: wide selection of OPTOTRONIC 24 V DALI, DMX and BLE

Products

Sort by:
Product
Color rendering index Ra
Color temperature
Luminous flux per meter
Luminous efficacy
Data sheet
TF600S-G1-927-05
90 580 lm 983 lm/W
TF600S-G1-827-05
80 2700 K 620 lm 1127 lm/W
TF600S-G1-930-05
90 620 lm 1051 lm/W
TF600S-G1-935-05
90 620 lm 1051 lm/W
TF600S-G1-940-05
90 625 lm 1059 lm/W
TF600S-G1-830-05
80 3000 K 660 lm 120 lm/W
TF600S-G1-840-05
80 4000 K 670 lm 1218 lm/W
TF600S-G1-865-05
80 6500 K 680 lm 1236 lm/W
TF600S-G1-850-05
80 5000 K 690 lm 1255 lm/W
TF1000S-G1-927-05
90 1015 lm 1025 lm/W
TF1000S-G1-827-05
80 1070 lm 1189 lm/W
TF1000S-G1-930-05
90 1085 lm 1096 lm/W
TF1000S-G1-935-05
90 1090 lm 1101 lm/W
TF1000S-G1-940-05
90 1095 lm 1106 lm/W
TF1000S-G1-830-05
80 1130 lm 1256 lm/W
TF1000S-G1-840-05
80 1140 lm 1267 lm/W
TF1000S-G1-865-05
80 1150 lm 1278 lm/W
TF1000S-G1-850-05
80 1170 lm 130 lm/W
TF1500S-G1-927-05
90 1460 lm 1014 lm/W
TF1500S-G1-827-05
80 1560 lm 1182 lm/W
TF1500S-G1-930-05
90 1570 lm 109 lm/W
TF1500S-G1-935-05
90 1590 lm 1104 lm/W
TF1500S-G1-940-05
90 1600 lm 1111 lm/W
TF1500S-G1-830-05
80 1660 lm 1258 lm/W
TF1500S-G1-840-05
80 1670 lm 1265 lm/W
TF1500S-G1-865-05
80 1700 lm 1288 lm/W
TF1500S-G1-850-05
80 1730 lm 1311 lm/W
TF2000S-G1-827-05
80 1820 lm 117,4 lm/W
TF2000S-G1-927-04
90 1840 lm 1064 lm/W
TF2000S-G1-930-04
90 1875 lm 1084 lm/W
TF2000S-G1-935-04
90 1885 lm 109 lm/W
TF2000S-G1-940-04
90 1900 lm 1098 lm/W
TF2000S-G1-830-05
80 1940 lm 1252 lm/W
TF2000S-G1-840-05
80 1950 lm 1258 lm/W
TF2000S-G1-865-05
80 2000 lm 129 lm/W
TF2000S-G1-850-05
80 2010 lm 1297 lm/W

Information about Family

Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads